Why Invest In The Best Salt Free Water Softener?
Many homes face issue with hard water, which can result in scaling and clogged water lines, whether they utilize well water or city water. Traditional salt-based water-softening systems can be expensive to buy and operate but are an efficient way to remove pollutants. Additionally, they are not the best option for people who must limit their regular salt intake.
Water softener drain line discharge could be a pretty major issue as well and if you are suffering from this, do check out our separate article on it.
An alternative to salt-based water softeners is salt-free equipment. These softeners eliminate impurities or reshape them so they no longer harm plumbing by using electromagnetic waves or filters. As the name implies, salt-free water softeners are less expensive to operate and maintain because they don’t require a regular supply of salt.
The greatest salt-free water softeners have the distinction of being fully maintenance-free and electricity-free. Consumers find these products to be far more appealing than salt-based systems because there is no need to discharge water from a water softener without salt or to add salt every few months.
It can be challenging to select the finest salt-free water softener for you as more and more systems enter the market as salt-free technology is being developed. In this article, we describe how salt-free water softeners function, offer advice on how to select the best water softener for your house, and provide a list of available products.
|Image||Product||Editor’s Comment||Rating||Get The Best Deal|
|SpringWell Futuresoft Salt-free Water Softener||Most Recommended Option
1. Highest scaling rate of 99.6% of reducing hard water.
|9.7/10||Check Current Price|
|Evo E-2000 Whole House Salt-Free Water Softener||Most Budget Friendly Option
1. Still does the job of reducing hard water.
|8.5/10||Check Current Price|
|SoftPro Elite||Most Elite Option
1. A higher end version developed with the same technology as Spring Well
|8/10||Check Current Price|
|US Water Systems GreenWave||New Product
1. Relatively new product developed based on NAC technology.
|7/10||Check Current Price|
If you happen to also be looking for the best whole house water filter for well water, we’ve done an in depth review about it for you.
Best Salt-free Water Softener
SpringWell Futuresoft Salt-free Water Softener
- Process: TAC
- Max Hardness: 81 GPG
- Water For: Up to 6+ people
- Flow Rate: Up to 20 GPM
- Warranty: Lifetime
Our ranking of the top salt-free water softeners is headed by the Springwell Futuresoft Water Softener. This high-tech, cost-effective water softening system has the greatest flow rate of all the systems we examined on this list and is capable of preventing up to 99.6% of scale without compromising your home’s water pressure or producing wastewater.
It is founded on Template Assisted Crystallization, or TAC for short, which has demonstrated to reduce hard water scaling by up to 99.6 percent. The principal minerals that make up hard water, calcium and magnesium, are crystallized mostly by TAC using catalytic media.
These hardness minerals remain suspended during their entire journey through the water system of your home because, in their crystallized state, they are unable to adhere to pipes and other objects.
So, scaling is prevented in your plumbing and home appliances. Additionally, any current scale creation will progressively disappear. For instance, your water heater will be more efficient as a result, and it will last longer overall with fewer repairs and maintenance tasks.
- The Springwell water softening system uses TAC, the most effective salt-free water softener method, to combat hard water (or Template Assisted Crystallization).
- There is no need for this unit to renew. Additionally, there is no water waste produced throughout the TAC process, and sodium ions are not required.
- If you purchase the appropriate size for your home, this salt-free system is also intended to have no impact on the flow rate and pressure of your water supply.
- The Futuresoft salt-free softener has a sizable stainless steel tank that shields its softening medium. A pre- sediment filter is also included with the Springwell, which removes dirt, dust, and other big particles that could harm the softening medium and shorten the lifespan of the system.
- The Springwell water system conveniently includes every component you’ll need for installation, including fittings, a mounting bracket, a bypass valve, and a spanner wrench for tightening.
- The stainless steel softening tank on this system is strong and free of salt. Depending on the size you select for the number of bathrooms in your home—1-3, 4-6, or 7+—the tank’s capacity changes.
- One of the few producers of soft water systems that uses only fully certified materials in their designs is Springwell. They provide a 6-month money-back guarantee in addition to a lifetime warranty for this saltless water softener system.
- Given that the Springwell is one of the greatest saltless water softeners available, its high cost is not surprising.
- After employing the method, it is difficult to test for soft water.
- If your water contains manganese, iron, copper, sulfur, or anything else that could harm the media, pre-treatment is required.
Evo E-2000 Whole House Salt-Free Water Softener
- Process: TAC
- Max Hardness: 75 GPG
- Water For: 6+ People
- Flow Rate: 15 GPM
The Evo E-2000 salt-free softener is our best cartridge-based salt-free water softening. Compared to conventional tank-based systems, this distinctive technology is more cheap and simpler to install. Excellent for those searching for a water-efficient, low-maintenance HVAC system that is also simple to install and maintain.
- The Evo E-2000 filters and conditions water while keeping beneficial minerals in it using two filter cartridges: a sediment filter and a TAC cartridge.
- With two cartridges fastened to the filter housing, this conditioner resembles a whole-house water filtering system. It is simpler to install than tank-based systems thanks to its architecture.
- The Evo E-2000 Whole House Salt-Free Water Softener doesn’t require backwashing, which means it doesn’t waste water like the majority of salt-free conditioners do.
- The greatest salt-free water conditioners all use template-assisted crystallization, which is the most common conditioning technique used by this Evo Water model. The TAC media is housed in a filter cartridge rather than a tank, which is the only distinction.
- This system is pre-assembled and ready to use, and it is built from approved components. It is perfect for homes with up to 6 bathrooms because of its flow rate of up to 15 GPM.
- When you purchase the Evo E-2000 Whole House conditioner, you are backed by a 120-day satisfaction guarantee. Additionally, a limited lifetime warranty is offered for this model.
- This system is not appropriate for you if your water hardness is greater than 75 GPG.
- The machine requires some care because the sediment filter needs to be replaced once a year.
- Process: NAC
- Max Hardness: 17 GPG
- Water For: 6+ People
- Flow Rate: 12 GPM
- Warranty: Lifetime
Another trustworthy option to the SpringWell FutureSoft salt-free water softening system examined above is the SoftPro Elite from Quality Water Treatment. The former is slightly more affordable, which is the most significant distinction. The risk-free trial time is consequently considerably shorter, and we also like SpringWell’s customer service better.
The SoftPro Elite is a salt-free water softener system that advertises “install it and forget it” function. Once your settings are programmed, there is no maintenance or other work required (or let the smart system program itself).
Whatever the case, the SoftPro Elite also uses Template Assisted Crystallization to change the hard water minerals into their crystal form, which, most crucially, prevents scale buildup and also causes older deposits to gradually disappear.
The advantages: Your plumbing needs less maintenance and repairs, and your water heaters, washing machines, and other equipment last longer and operate at top performance.
- Scale Control Technology, a method used by SoftPro, provides 99.6% scale prevention. It dissolves and renders inactive the hard water ions that are present in the water.
- SCT not only prevents scale from forming but also eliminates any existing buildup in your plumbing and pipes.
- A sediment and chlorine pre-filter measuring 5 microns is included with the SoftPro system. The larger sediment particles that could harm the softening resin or harm the appliances in your house are intended to be removed by this water filtration media.
- This system uses no electricity and lasts for 6 years. It is one of the most economical and eco-friendly salt-free softener systems available today because it doesn’t waste water while doing SCT.
- With a lifetime warranty and online customer service, the SoftPro Water Conditioner gives users piece of mind.
- For its system, SoftPro is now providing a free optional update. If you check the box, you’ll get a quick-connect hose kit in the 3/4 inch size for no additional charge.
- The SoftPro’s exterior can be shielded with a detachable, washable neoprene jacket. The tank is shielded from humidity and extreme cold by this jacket, which also aids in reducing condensation.
- The installation of this equipment was challenging for certain consumers. If you’re not handy, the plumber can be needed.
- There is only one size of the unit available.
- Iron, manganese, and sulfur should not be present in your water since they can harm the media.
US Water Systems GreenWave
- Process: NAC
- Max Hardness: 81 GPG
- Water For: 6+ People
- Flow Rate: 25 GPM
- Warranty: Lifetime, 10 years, 5 years
The US Water Systems GreenWave Salt-Free Water Conditioner, one of the more recent conditioners to enter the market, uses the Nucleation Assisted Crystallization (NAC) method of saltless softening and boasts 97% effective conditioning capabilities.
- The GreenWave employs NAC to neutralize these hardness minerals, preventing them from sticking to surfaces and forming scale, as opposed to using ion exchange to remove calcium and magnesium from water. The system uses no electricity and creates no waste water.
- The number of NAC sites increases as a result of the Vortech tank’s even water flow. By eliminating channeling and increasing water contact time with the medium, the system becomes considerably more effective.
- There are four sizes available for the GreenWave softening tank: the 10 GPM system utilizes a tank that measures 9 x 52.5 inches, the 15 GPM water filtration system measures 10 x 58.5 inches, the 20 GPM unit measures 12 x 56.5 inches, and the 25 GPM unit measures 13 x 58.5 inches.
- The user handbook contains detailed instructions, along with illustrations, on how to install the GreenWave. The installation process isn’t overly complicated and there are just 10 stages in all.
- The water filtration system comes in four sizes and two inlet/outlet sizes (1 inch or 3/4 inch), which should make setup much easier.
- As scale is removed from the interior of your water pipes after the GreenWave is installed, your faucet aerators and drains could occasionally clog. Your water might also seem milky for a few days during this scale-removal process. This is evidence that the salt-free water softener system is functioning well.
- Although the GreenWave will enhance the characteristics of your water throughout your house, you might still notice spotting on your sinks, fixtures, shower doors, and tiles, according to the user handbook.
- Any impurity that can harm the media must be filtered before it enters the water filtration system. You will need to purchase a sediment pre-filter separately because one is not included.
- This softener is advertised with a radial flow carbon filter, however the filter is additional.
Yarna Capacitive Electronic Water Descaler
- Process: Electromagnetic
- Max Hardness: No limit
- Water For: n/a
- Flow Rate: n/a
- Warranty: 1 year
One of the greatest solutions for salt-free water softening is this cutting-edge electronic water descaler from YARNA thanks to its efficient design and simple installation method (no plumbing skills required!). The main water line entering a home is encircled by copper rings in this design.
The water softener softens the water as it flows through the pipe that has been wrapped, using electrical impulses to change the water’s dissolved solids into crystals. Since these crystals won’t adhere to one another, they won’t produce the scaling that can accumulate on pipes and other equipment and clog them.
Their water may be installed in as little as 15 minutes without the use of any tools. It is limited to pipes with a maximum diameter of 1 inch and does need access to 10 inches of pipe space. Plugging this descaler into a typical 115-volt outlet is easy.
- The Yarna Capacitive Electronic Water Descaler delivers a high frequency modulated electromagnetic field through a single cable wound around your waterline, controlling the behavior of hardness ions and preventing scale formation.
- You can profit from using the Yarna conditioner by paying less for heating, getting more use out of your appliances, and having less scale buildup.
- The Yarna Capacitive Electronic Water Descaler can be installed without causing any damage to your water line. This is a huge benefit if you rent your home or if you simply dislike doing large DIY projects.
- This form of water purification has no impact on water pressure or flow rate because the Yarna doesn’t intercept your water.
- If you’re on a tight budget or don’t want to spend more than $500 on a softener, this electric conditioner is the best option because it costs a fraction of what other saltless systems do.
- Any kind of pipe, including copper, iron, stainless steel, plastic, and PVC pipes, can be used with the Yarna.
- The Yarna is effective for up to 1.2 miles beyond the location of installation, so you may utilize a single device for your entire home.
- You can only use the Yarna Capacitive Electronic Water Descaler on pipes that are up to an inch thick. This salt-free water softener system is not appropriate if your water pipe is larger.
- Even though the electronic descaling technique is still quite new, there isn’t much proof that it is effective.
- This device needs to be connected to an electrical source.
Pelican NaturSoft Water Softener Alternative
- Process: TAC
- Max Hardness: 75 GPG
- Water For: 5+ people
- Flow Rate: 10 GPM
- Warranty: 1 year
One of the most advanced salt-free water softening systems on the market is the Pelican Natursoft system. It combines the re-ionization of salt-free water with a pre-sediment filter that can handle particles larger than 10 microns.
Homeowners may increase the overall quality of their water with this combination, which also extends the life of their appliances. Your hot water heater is the device about which you need to be most concerned about limescale.
Even the best water heaters have problems preventing residue build-up on these nodes. The majority of water heaters incorporate a technology that helps descale water as it goes into the water heater.
The water heater and all other appliances in your house will live longer thanks to this technology. The combination of a salt-free system and a sediment filter will prevent the buildup of limescale in your pipes and water supply.
Thanks to Pelican’s comprehensive instructional videos and comprehensive instruction guide, the installation procedure is simple and uncomplicated.
- Without using chemicals or wasting water, the Pelican NaturSoft aids in the reduction of hard water scale. It makes use of a medium with calcium carbonate surface structures. These pull dissolved hardness minerals into their crystalline surface by drawing them to them.
- The suspended particles mirror the process that occurred inside the salt-free water softener system, which attracted the minerals in the scale, caused them to crystallise, and then pulled them into the water to travel through the system’s plumbing, assisting in the removal of any existing scale.
- This third-party approved scale prevention will do a lot of things, such lengthen the life of your water heaters and appliances, improve cleaning, use less soap and detergent, and much more.
- There are various features to shorten and streamline the installation procedure. The material in the Pelican’s softening chamber is already loaded and prepared for installation. The bypass valve is installed at the main water line before the pre-filter using 1-inch fittings that are included. The salt-free systems installation manual contains all of the information you require.
- Of all salt-free water softeners, the Pelican NaturSoft has one of the longest lifespans. The pre-filter must be replaced every 6 to 9 months while the media lasts for 12 years.
- Pre-filter protection for the media is already included in the cost of the conditioner, therefore there is no additional cost.
- It comes with a limited lifetime warranty, which guarantees that the system will continue to function without errors for 12 years after your first purchase when used normally and maintained.
- One of the priciest saltless softening choices on the market is the Pelican.
- Brass fittings cost more but are more robust and long-lasting. If these fittings were included in the price, that would be preferable.
Aquasana Salt-Free Water Conditioner
- Process: NAC
- Max Hardness: 25 GPG
- Water For: 5+ people
- Flow Rate: 7 GPM
- Warranty: 6 years
Compared to other kinds of salt-free water softeners, this one requires a substantial investment, but it also filters out a lot more contaminants. To get rid of calcium, lime, iron, and other hardening minerals, it uses carbon and KDF filters.
The water supply in a home becomes softer and healthier because to the removal of dangerous impurities including mercury, chlorine, lead, herbicides, and pesticides in addition to water softening.
Families of four or less will benefit from this water filtration system’s flow rate of 7 to 8 gallons per minute. It uses two major filters to soften the water and filter out impurities; each filter lasts for about three months before it needs to be replaced. The system needs to be plumbed into the home’s main water line for installation.
The hardest to eliminate contaminant, chlorine, is totally eliminated from your water supply. The flow velocity of every faucet in the entire house also left a lasting impression on us.
The decrease in water pressure following the installation of any water filter or softening system is one of the most common complaints we hear.
- The Aquasana uses Scale Control Media (SCM) to change the hard water ions’ molecular structure. This approach works well to remove existing scale and stop the growth of new scale, and it doesn’t require salt.
- This salt-free softener works best when used in conjunction with another Aquasana filtering system product to provide full water treatment that addresses both concerns with hard water and contaminated water. You have the choice to purchase this system in addition to the Aquasana 500,000 Gallon Well Water Rhino filtration system for treating well water.
- Several installation necessities, including the conditioner and pre-filter, a shutoff valve, a wrench, and a pre-filter support bracket, are included with the Aquasana. A “professional-grade installation kit” with brass fittings and pex support brackets is available for a small premium.
- For the system, a pre-filter is already included, so you won’t need to purchase it separately.
- If you want a low-maintenance system that you can put up and forget about, the Aquasana is a perfect choice because the softening media only needs to be replaced every 6 years.
- Unlike traditional water softeners, the device doesn’t waste water. You don’t have to bother about salt top-ups, and it doesn’t require energy to operate.
- With a 6-year warranty and a 90-day guarantee, the Aquasana gives you security.
- Since the conditioner only comes in one size, it might not fit you if you use more water than is typical.
- The Aquasana website is missing certain details; to find out more about system capacity and what the sediment filter filters out, get in touch with them.
- The installation kit is an additional cost, and it does not come with a shutdown valve.
Best Salt-Free Water Softener Buyer’s Guide
It’s crucial to understand what to look for in a high-quality product before you can purchase the greatest salt-free water softener. This section contains all the details you require regarding salt-free water softeners.
Before You Shop For The Best Salt-Free Water Softener
Salt-free water systems and salt-based water systems differ significantly. A salt-based water softener employs salt as a means of eliminating the impurities that cause water to harden, reducing the scaling that these particles can lead to on plumbing and increasing the sudsiness of soap for bathing, washing dishes, and cleaning clothes.
For traditional water softeners to function, salt must be replenished on a regular basis, at a rate of around 40 to 80 pounds each month. The ionisation method used by these salt-based water softeners to purify water also requires an electrical connection.
Electricity or salt are not used in salt-free water softeners. Systems without salt do not get rid of the particles that make water hard, in contrast to systems that do. Instead, they treat the water to prevent the accumulation of these impurities on faucets and showerheads.
While the minerals are still present in the water, the conditioning procedure improves their palatability. A salt-free system is probably unable to soften the water sufficiently in homes with extremely hard water or more significant problems, including lead in the water.
Finding out the water quality in the house should be the first step before choosing on a salt-free water softener with these considerations in mind. A straightforward water hardness test kit, which includes a vial, a dropper, and liquid soap, can be used for this.
The vial must be filled with water to a predetermined line, drops of soap must be added, and the vial must be shaken to create suds. The harder the water is, the more droplets of soap it takes to create suds. Water that contains more than 10.5 grains per gallon is regarded as very hard, whereas water that contains 7 to 10.5 grains per gallon is regarded as moderately hard.
Important Factors to Consider When Choosing The Best Salt-Free Water Softener
A salt-free water softener’s efficacy may be impacted by the quality of your water. For example, high concentrations of iron, sulphur, manganese, and silt can harm the media and reduce its longevity. Additionally, certain salt-free water softeners call for water with a specific pH range.
If you use city water instead of well water, your water is more likely to be suitable for use in a conditioning unit. A sediment pre-filter is typically sold with salt-free water softeners. To safeguard the media in your salt-free system, be sure to use this filter.
There are numerous varieties of salt-free water softeners available. TAC (template-assisted crystallisation) medium is used in the most common and efficient salt-free softener type. These salt-free softeners don’t add anything to the water and don’t take away good minerals, but they stop scale from forming because of water hardness minerals.
Other systems that don’t utilise salt soften water with chemicals, which are usually less expensive than TAC softeners. Additionally, there are electromagnetic water softeners, which are the least expensive but least efficient.
Water Flow Rate
There is a maximum flow rate that can be produced by all POE water treatment systems, including conventional water softening systems and salt-free systems. When choosing the right size salt-free softener for your home, you should take into account the size of your family and your water usage.
You can discover that your water flow rate is insufficient if you get a water conditioning system that can’t keep up with your water demand. The effectiveness of your appliances and the strength of your showers can both be impacted by low water flow rates.
Look for a system with a flow rate of at least 12 GPM if your house has 1-3 bathrooms. A salt-free system with a 15 GPM flow rate is required for homes with 4-6 bathrooms.
Installation & Maintenance
Before your water heater, a salt-free water softener should be placed at the point of entrance into your home. This guarantees that you have access to hot, high-quality water everywhere throughout your house. Scale development can cause hot water heaters to lose efficiency, so you’ll want to stop it as soon as you can in your waterline.
If you know a little about plumbing and are confident in your DIY skills, installing a salt-free system is not too difficult.
Systems with salt-free water softeners require much less upkeep than those with standard water softeners. Media only needs to be replaced in salt-free systems with TAC media beds once every six years or more.
You can take advantage of a water softener that requires almost little maintenance because it doesn’t require a backwashing or regeneration cycle, nor do you need to replace the salt used in the ion exchange process.
Choose a system that uses magnetic softening rather than a softening material if you want a completely maintenance-free setup.
System Control & Features
An important benefit is having a salt-free water conditioner that is simple to set up and operate. The majority of soft water conditioners have a digital control panel that allows you to monitor the unit and receive alerts when the media needs to be changed.
You’ll find it simpler to explore your system’s information if it has features like a touch display and a backlit screen.
Compared to salt water softener systems, salt-free water conditioners often require less space, but you’ll still need enough space for installation and maintenance.
Measure the area where the installation will take place and compare the measurements to the size of the no-salt water softener systems you are considering. Make sure you have adequate space to install the system and replace the resin comfortably.
When a softening system obtains third-party certification, it indicates that an outside agency has examined the system and determined that its performance claims are accurate.
When looking for salt-free water softeners, the most prevalent certifications you’ll come across are NSF/ANSI Standards 61 and 42, both of which deal with structural integrity.
No certification exists to demonstrate how a water softener lowers hardness levels or scale buildup, and demonstrating this with a salt-free conditioning water system would be particularly challenging.
If a water conditioner has been examined and found to satisfy industry requirements, it may additionally obtain a Water Quality Association (WQA) certification.
A salt-free water softener has little ongoing costs after the initial purchase. The water softener will probably need electricity to run, thus it will probably add to your electricity cost, albeit probably not significantly.
If you’re employing resin-based TAC salt-free technology, you’ll also need to replace the softening media. However, a saltless water softener system will cost far less per gallon of softened water than a conventional water softener. This is especially true if you have a magnetic water softener, which doesn’t require much maintenance and doesn’t have a media bed.
The best salt-free water softener systems come with lifetime warranties and trial periods that provide refunds for unhappy customers.
You may buy a salt-free water softening system with confidence knowing that if you don’t like the system, you aren’t bound for life thanks to a lengthy warranty and a money-back guarantee term.
What is a Salt-Free Water Softener (Water Conditioner)?
A water softener that doesn’t need salt is known as a salt-free water softener. Salt-free water softeners crystallise hard water minerals as opposed to completely eliminating them from a water supply, using a process known as ion exchange, which is used by conventional softeners. Water softeners without salt just condition it, not soften it.
Types of Salt Free Conditioners
Template Assisted Crystallization (TAC)
Template Assisted Crystallization is the most widely used method for softening water without the use of salt (TAC). While not a softener, a TAC conditioner produces outcomes that are quite similar to those of salt systems.
By altering the composition of these minerals and reducing scale formation, TAC is a method that treats hard water minerals in a water supply. To provide all the advantages of soft water while keeping beneficial essential minerals, a TAC medium is used.
Hard water minerals are drawn to the resin and adhere to it as water passes through a TAC conditioner. The minerals are trapped in the resin until they crystallise and are then released into the water once more.
Another sort of conditioning technology is chelation, which involves binding hardness ions to a chelating agent like EDTA or citric acid. Since these mineral ions are suspended in water, they cannot form scale that can be formed on surfaces.
Chelation was formerly only employed in industrial settings, but in recent years, numerous at-home chelation conditioning procedures have become accessible.
Minerals in hard water are separated using electromagnetic coils by electromagnetic water conditioners, which stops scale from developing.
This method doesn’t involve any tanks. Water is typically intercepted before it reaches your heater by a coil or a pair of magnets that are typically mounted to the outside of your water pipe.
The least expensive salt-free softening option is electromagnetic conditioners, however there is little evidence to support their effectiveness.
Advantages and Disadvantages of Saltless Water Softeners
Salt-free water conditioners are growing in popularity as a softening option for well and city water for a variety of factors. These consist of:
Saltless water softeners have a lower footprint than salt-based water softeners since they don’t need two sizable brine and resin tanks. The resin needed for TAC is typically housed in a single tank in salt-free softeners. If you get a magnetic water softener, it won’t even require a tank; instead, magnets are installed on either side of the water line, anywhere before the water heater.
No Electricity Required
With a salt-based softener, you can’t avoid using electricity because it needs to be connected to a power source in order to regenerate. While some saltless water softening systems additionally require a power supply connection, the majority do not.
Lesser Water Wastage
The fact that salt-free softeners don’t waste water when softening water is one of their main advantages. Water waste is inevitable with salt-based water softeners since the resin tank needs to be rinsed through with water after it is completely full with calcium and magnesium ions. There is no regeneration process with TAC-based water softening, hence no water is lost.
A salt-based water softener requires dedication to maintain. You’ll need to replenish your salt periodically and handle problems like bridging. A salt-based water softener should also undergo a thorough cleaning once every few months to maintain good performance. On the other side, salt-free water softeners require almost no maintenance at all.
Healthy Minerals Not Removed
Despite the fact that calcium and magnesium minerals make water harder, they are beneficial to us and give water an alkaline flavour that most people like. While salt-based water softeners entirely eliminate the water hardness ions, salt-free water softeners merely alter the structure of the water rather than softening it totally. This means that you can still get the calcium and magnesium benefits for your health without having to deal with water hardness problems.
No Added Salt to Water
Even though a salt-based water softener only adds a tiny quantity of salt to the water, it nevertheless increases your sodium intake. On the other hand, salt-free softeners don’t salt your water. If you follow a low-sodium diet or avoid consuming more salt than is essential, this is ideal.
What Are the Disadvantages No-Salt Water Conditioners?
Does Not Produce Soft-Feeling Water
A salt-free water conditioner won’t actually make your water feel soft (i.e., silky smooth, as salt-softened water feels). This is due to the fact that your water still contains the calcium and magnesium water hardness ions.
Not As Effective As Salt-Based Softeners
You may still see some scale because salt-free water softeners don’t actually remove the minerals found in hard water. A salt-based water softener is more effective against limescale than a softening system that does not use salt.
Take Longer to Show Results
Compared to saltless water softener systems, salt-based softeners typically show results more quickly. This is as a result of the salt-based softening process’ greater efficacy.
Affected Water Pressure
Installing a salt-free system could lower your water pressure, just like with any POE water system. Even if you correctly size your system, you could still see a decrease in water pressure after installing a conditioner.
Difficult to Prove Efficacy
Traditional water softeners entirely eliminate the minerals in hard water, making it obvious when they are in operation. Your water is soft, as you would discover if you tested the levels of hardness in it.
However, if you tested conditioned water, the hard water minerals would still be present, making the water technically still hard. Scale decrease is the only indicator that the technology is effective.