If you’ve ever pondered on ways to clean a Brita water pitcher, this guide will show you how to do it safely while restoring it to its original, pristine state.
Why Is There A Need To Clean Our Brita Pitcher?
The fact that the Brita pitcher is intended to contain purified, filtered water does not imply the pitcher will stay clean over time. The pitcher has to be cleaned frequently to prevent the buildup of pollutants, which is the same as most things that are frequently handled.
Blotches on the pitcher’s outside from greasy or unclean hands and an accumulation of moisture within are typical issues with Brita filters.
In conclusion, you should maintain a clean Brita water filter as well as resevoir if you aim to continue drinking great tasting water.
Steps for Cleaning a Brita Pitcher Filter
There are a few more things to acquire if you don’t already have them at home in order to clean a Brita pitcher, aside from embracing the fact that the water filter pitcher has been added to your list of cleaning tasks.
We’ll include everything you could need even if you can clean your water filtration pitcher just as well with regular soap and water (because it doesn’t need any unique or specialized cleaning materials). For the sake of organization and just in case.
Brita filter, a measuring cup, a sponge, mild soap for dishwashing, water, vinegar, a dish towel, and a brand new filter are all necessary.
As most water filtration pitchers are built similarly, utilizing this instruction for most of them shouldn’t be an issue. It will be applied to their contours, nooks, reservoirs, and handle hollows, making them spotless.
Instructions
Disassemble the Pitcher
You must disassemble the pitcher in order to get appropriate access to the inside for deep cleaning.
Then, dump the pitcher of any remaining water. Finally, if you’re changing the filter, remove the cover for the container and set the filter on a piece of paper towel.
Wash both the container and its lid thoroughly
To clean the reservoir and lid, submerge them in a container filled with soapy warm water. Use a gentle sponge to scrub all areas, ensuring that every corner and crevice is reached. Avoid using abrasive materials that may cause damage.
Get rid of the mold and limescale
If your water is hard, you might notice a white limescale buildup inside your pitcher. Brita water filters are also prone to mildew growth.
If you see white spots of limescale or mildew inside your Brita pitcher, you can get rid of them easily. Just mix a teaspoon of white vinegar with a glass of tap water, soak a sponge inside the solution, and scrub the affected areas until they are clean.
Clean and Dry the Components by Air
Clean the reservoir as well as the lid in cold water that is running until all white vinegar and soap suds are gone. Put the components inverted on the dish towel or drying rack and let them air dry.
Disinfect the Filter
If you’re changing the pitcher model’s filter, flushing new filter in accordance with the manual’s recommendations for the pitcher model. By doing this, the filter will be prepared and ready to be reinserted into the pitcher when it is dry.
Rebuild the Pitcher
Put the top back on the pitcher after attaching the filter on the bottom side. With a brand new filter, prepare it further by running it through numerous cycles of tap water as directed in the handbook to clear out any remaining carbon dust.
Tips for Cleaning Brita Water Pitcher
We wish to guarantee the absolute safety of your water. Also, we want to make sure that you utilize your water filter pitcher as effectively and as long as possible.
As a result, we created a bonus section for cleaning the Brita pitcher effectively. You can keep your pitcher in top shape with the use of them.
For crevices, use a toothbrush
Use a toothbrush to scrape the nooks in the water filter if you are having trouble getting stains out using a sponge/cloth.
Air-Dry the Components
The pieces should be allowed to dry naturally rather than using a dishcloth, which leaves some moisture behind. If you can spare the time, allow the parts to dry naturally using drying tray.
Toss It Away if Uncertain
A contaminated Brita water pitcher may not always be cleanable, not even with basic dish soap or anything stronger. As bleach shouldn’t be used in a water filter, if your pitcher has mold growing in it and looks like a swamp, it might be worth considering buying a replacement.
Replace the cartridge as needed
There is a fix if your water filtration pitcher smells musty and you have mold and mildew growing in it. That is a relatively frequent issue that may be effectively fixed by replacing the cartridge on schedule.
You might also get mold and mildew issues if you miss the drying stage of the cleaning process. Before you proceed with reassembling the pitcher, it must be entirely dry because else, you guessed it, mold and mildew will develop.
What is the recommended frequency to clean a Brita pitcher?
It is recommended to develop a daily cleaning routine for your Brita water filter, or clean it more often if any part of the pitcher appears dirty.
The optimal time to clean your Brita pitcher is after washing your dishes and cutlery by hand, using hot water as well as dish soap for cleaning the pitcher.
If you find it challenging to clean your Brita pitcher every day, aim to clean it at least once every 2-3 days or if you observe a deposit of mildew or limescale inside the container.
Preventing the Accumulation of Mold and Mildew in Your Brita Water Filter
Mildew along with mold are undesirable contaminants to encounter in a water filter, as they not only look unpleasant but can also pose health risks.
Mold, either black/green, can develop after a period of time under any circumstances. However, it is more likely to appear in areas with high humidity, such as your home.
To prevent the buildup of mold and mildew inside the Brita filter, it’s important to keep the humidity level in your home below 50%. If necessary, utilize a dehumidifier and ensure that your home’s HVAC systems receive routine inspections.
If plants are present in your house that are mildewed, you should either throw away the plants or remove the mildewed areas.
Finally, cleaning the water pitcher as frequently as possible is the best approach to stop the development of mold/mildew in your water filter.
It is important to change the filter of your Brita water pitcher regularly to avoid the buildup of mildew. The presence of such impurities can indicate a larger accumulation inside the filter.
What is the Recommended Frequency for Replacing Your Brita Filter?
Whether you have a Brita Stream or the Standard Brita filter, you should replace the filter every forty gallons/around every couple months.
In case you own a Brita Longlast+ water filter, you’ll be pleased to know that it can last for up to six months or 120 gallons. Your pitcher will typically have something like a LED indicator that will notify you when it’s time to replace the filter.
Failure to replace the filter in accordance with schedule may result in the filter retaining bacteria and releasing harmful toxins back into the water, in turn which produce an accumulation of impurities inside the Brita pitcher as well as causing you to become unwell.
Cleaning your pitcher frequently is especially crucial when you own a Brita Longlast+ filter since a mildewy atmosphere can ruin the filter as well as reduce its lifespan.
Frequently Asked Questions
Can you put Brita pitchers in a dishwasher to wash them?
Brita pitchers may go in the dishwasher provided that it’s not using extremely hot water. It’s vital to remove the filter first.
How Should One Clean Their Brita Pitcher?
Most of the time, all you need to clean a Brita pitcher with is a soft cloth or a sponge bathed in hot water or warm water with a mild dish detergent. Use a dishwashing liquid or simple dish soap that won’t scratch the pitcher. Use one teaspoon of white vinegar and one cup of warm water for intense cleaning process.
Can Vinegar Be Used to Clean a Water Filter?
You certainly can. In addition to reducing mineral buildup and treating concerns like mold and mildew, a washing solution including vinegar may be quite helpful. Just pour vinegar into your pitcher and let it stand for a few hours.
The calcium film that hard water causes to form on surfaces will be completely removed by the extremely acidic vinegar, leaving your water filter pitcher spotless. Just wash your filter as usual with soap and warm water after using the vinegar.
Can I Clean a Water Filter Pitcher Using Bleach?
When home bleach is mentioned, ideas of cleanliness and disinfection are frequently conjured up. And even while doing this is OK, you should still avoid cleaning your pitcher with bleach or any other abrasive chemicals.
The harsh chemicals may really harm the water filter, which is the reason for this. The safest cleaning process for your water filter pitcher is warm water and soap.
How does one clean a Brita pitcher that is moldy?
Your pitcher may be cleaned of mold using warm water and vinegar. If the mold is extremely problematic, soak the pitcher in this solution beforehand before using a sponge or towel to gently wash the surfaces.
How much time is required when it comes to clean a Brita pitcher?
It takes around five minutes to clean. The pitcher will require less time to clean because you won’t have to remove tough, embedded stains as often.
How can mold be avoided in Brita pitcher?
Mold shouldn’t grow on a pitcher that is completely clean. Here are some ways to prevent growth of mold in the pitcher:
Instead of keeping your pitcher of water in a warm, dark area of your house, keep it in the refrigerator.
Also, you can change the water filter as instructed in the guide. Try to give the Brita pitcher a daily warm water rinse and a thorough cleaning once per week at a minimum. Furthermore, it is recommended to pour the drinking water into a separate glass before drinking rather than directly from the Brita pitcher.
It is essential to clean your hands before touching the filter. Ensure that the spout is tightly closed every time you use the pitcher.
Use your filter only on municipally provided drinking water; never on well water. Just cold water should be filtered through the pitcher, and you should check to see if there are any humidity related issues in your home. If it occurs, despite your best efforts, your pitcher will keep accumulating mold.
Is it possible to disassemble Brita filters for cleaning?
Yes. Above the pitcher, at the aperture of the lid, is where the filter is placed. To clean your pitcher, you simply take it apart and take the water filter out. The pitcher is simple to disassemble, but if you’re hesitant, you may refer to the directions on the pitcher.
Final Thoughts
A nice water pitcher is one that is clean. It is advantageous for you and the water filter pitcher to thoroughly clean the pitcher. The ultimate effect might be dangerous to your health if you frequently neglect to clean your pitcher.
When dirt builds up in your water filter, it will become less efficient at removing potentially harmful elements from your tap water. What it could really do is introduce bacteria to the water you are drinking, since their growth thrives in the wet environment of the pitcher filter.
Thus, take excellent care of your water filter pitcher to take good care of your health.